Company News

NEW PRODUCTS!

Bellmouth– Bellmouth fittings are designed to the highest engineering standards for maximum performance. They are used as a take-off for a fast, solid, and highly efficient connection. This conversion fitting, from a flat plenum or duct into Spiral pipe greatly reduces turbulence and noise. The pressure drop characteristics are superior to any other design.

You can get more information from our catalog on page 17 or
click here

Spiralmate® – Spiralmate® flanges are airtight and easy to install, and no additional sealants are required. They can be installed on-site, they are easy to align, and they use a one-bolt closure. Spiralmate® fits Spiral seam and most ribbed pipe, and it accommodates moderate variations in pipe diameter.

You can get more information from our catalog on page 24
or click here.

Quick sleeve Pressed and rolled steel angle rings are used widely in joining ductwork together in dust and fume control work. All rings are unpainted, mild steel (Galvanized and Stainless Steel available). They are available with or without holes. Nearly any bolt circle or hole size is available.

You can get more information from our catalog on page 25 or
click here

1402AFQ Tape

You can get more information from our catalog on page 27 or
click here

Wall Mount Hanger

You can get more information from our catalog on page 28 or
click here

Universal Support System The Universal Support System is a standalone hanging system that supports a wide variety of applications. This system comprises a galvanized steel aircraft cable with integral, self-locking hook and a patented locking device that allows quick installation and release for adjustment or removal. The system is available in 2mm and 3 mm cable sizes, which support 100lb. and 200 lb. loads respectively. Both have a 5-to-1 safety factor.