Approx coverage 4.2 sq. ft.
PVC paint is available to touch up any scratches that may have occurred during installation.
The process of PVC sheet mfg. begins with (1) prime, hot dipped G-60 galv. steel cleaned & fire treated. (2) A special epoxy primer bonded to both sides of the metal. Finally (3) a 4-mil polyvinyl coating heat fused to one side (4 x 1 Standard) or both sides (4 x 4).
By combining the strength of steel and the chemical inertness of plastic, PCD or PVS Flat sheets are corrosion and weather-resistant. PVS or PCD will not rust, chip, crack, peel, corrode or produce odors. Its practical temperature range is from -40 F to 250 F. Our Prime sheets can be used for most any job utilizing its (LFQ) lock forming qualities.
PVS Tape
Duct Seal Tube
PVS Tape
Quantity
Size
Part #
1 Roll
2" x 108'
3002
1 Case = 30 Rolls
2" x 108'
3003
PVS Duct Seal
Quantity
Size
Part #
1 Tube
1/12 Gallon
S2TD
1 Pail
1 Gallon
S2D
1/4' Bead @ 300' or 2" x 1/32" @ 300'
Fasten joints with metal screws or rivets at 6" intervals with a minimum of three per joint, then sealed by tape or sealant.
