Search:
Home   |   Products   |   Downloads   |   About Us   |   News   |   Contact Us   |   Site Map   
Laterals      

     45° Lateral, Tapered Reducing Lateral,
     30° Lateral & Saddles
  Printer Friendly Page         

Available in any angle. Standard is 45°

Click here to Download Engineering Specs
45° Lateral
(L-1)		 Tapered Reducing Lateral (Standard)
(L-1-R)
Click Here to Calculate
Dimensions to be listed in order of A, D Dimensions to be listed in order of A, B, D
Available in any angle. Standard is 45°.
30° Lateral
(L-1-30)		 Saddles
Available with or without boot

Dimensions to be listed in order of A, D Dimensions to be listed in order of D, P
Standard boot has 2" perimeter around branch.

       Optional 45° Reducing Lateral, 45° Double
       Parallel Lateral & Reducing Lateral Cross

      Laterals

 

 

Available in any angle
Optional 45° Reducing Lateral
(O-L-1-R) 		45° Double Parallel Lateral
(L-2)
Dimensions to be listed in order of A, B, D Dimensions to be listed in order of A, C, D

Reducing Lateral Cross
(Full Taper Standard)
(L-2-R) @ 180°

Dimensions to be listed in order of A, B, C, D
Laterals      

     Multi-Branch Laterals (Manifolds)

Available In any angle

How to Order

To order a multi-branch lateral (or manifold), first give the dimensions of A, B, C, D, E, F, G, etc. Then give the branch angle (45°standard) and the radial angles if needed.
Example 1: 12 x 6 x 3 x 4 x 5 x 6 x 7 with 45° branch angles. All branches at radial angle 0°
Example 2: 8 x 6 x 4 x 4 x 4 x 4 with 45° branch angles. Branches C and E at radial angle 0°. Branches D and F at radial angle 180°.

[Back to top]

11419 Yellowpine St. NW - Minneapolis, MN 55448 - Ph: 763-755-7677 - 1-800-426-3643 - info@spiralmfg.com