As the leader in the industry, Spiral Manufacturing Co., Inc. does not put doors on the open area of Floor Sweeps for safety reasons. The use of Blast Gates 42″ above the floor saves severed fingers and back injuries.
|4″||10||6||8 1/4||3 1/2|
|5″||10||6||8 1/4||3 1/2|
|6″||10||6||8 1/4||3 1/2|
Radial Arm Saw hoods along with Chop Saw Hoods are designed to be located behind the sawblade in a fixed position. All standard hoods are made of 18 gauge galvanized steel.
|4″||4||8||14 1/2||5 1/2||1 1/2|
|5″||5||8||14 1/2||6||1 1/2|
Bellmouth fittings are designed to the highest engineering standards for maximum performance. They are used as a take-off for a fast, solid, and highly efficient connection. This conversion fitting, from a flat plenum or duct into Spiral pipe greatly reduces turbulence and noise. The pressure drop characteristics are superior to any other design.
|Standard Radius Bellmouth|
|D||A||B||R||Wt. Lbs.||D||A||B||R||Wt. Lbs|